assembling your system
(Step 1) Stand the AIRcompressor upright on a flat surface, and turn the dial to 3 o’clock.
(Step 2) Take one end of the Flex AIRhose, and connect it to the nozzle of the AIRcompressor. Then connect the other end to the AIRbrush.
(Step 3) Insert the A/C adapter into the back of the AIRcompressor, and plug it into a nearby outlet.
your AIRpod: prepare. attach. release.
Shake it: Always shake the AIRpod well before every use to ensure a smooth color application.
Cap off: Remove the chrome cap and tamper seal from the AIRpod.
Loosen up: Upon first use, or as needed, pull on the clear loop while holding up the AIRpod tip.
Let it spray: Open the plug before every use to allow the makeup to spray. Be sure to close it when the AIRpod is not in use.
Attach it: To attach the AIRpod, press down on the release button, and push the AIRpod horizontally into the AIRbrush until you feel it pop into place.
Release it: To release the AIRpod, press down on the release button, and pull the AIRpod away from the AIRbrush.